What Is G-Code?
A typical G-code block looks like this:
G01 X10.500 Y5.250 F50.0 ; Linear interpolation at 50 ipm feed rate
G-Code Command Categories
G-Codes (Motion and Geometry)
| Command | Function |
|---|---|
| G00 | Rapid positioning (non-cutting move) |
| G01 | Linear interpolation (straight-line cutting) |
| G02 / G03 | Circular interpolation (clockwise / counterclockwise) |
| G17 / G18 / G19 | Plane selection (XY / ZX / YZ) |
| G20 / G21 | Units (inches / millimeters) |
| G40 / G41 / G42 | Cutter compensation (off / left / right) |
| G43 / G49 | Tool length offset (on / off) |
| G54-G59 | Work coordinate systems (WCS) |
| G80-G89 | Canned cycles (drilling, boring, tapping) |
| G90 / G91 | Distance mode (absolute / incremental) |
M-Codes (Machine Auxiliary Functions)
| Command | Function |
|---|---|
| M00 | stop (operator intervention required) |
| M03 / M05 | Spindle on (CW) / Spindle stop |
| M06 | Tool change |
| M08 / M09 | Coolant on / Coolant off |
| M30 | end and rewind |
From CAD to G-Code: The CAM Workflow
CNC operators rarely write G-code manually for production parts. Instead, the workflow follows:
- CAD Modeling: Engineer creates 3D model with geometric dimensions and tolerances
- CAM ming: CAM software (Mastercam, Fusion 360, SolidWorks CAM) imports the CAD model and generates s
- Post-traitement: The CAM post-processor translates generic s into machine-specific G-code syntax
- Verification: G-code simulation detects collisions, over-travel, and cycle time issues
- Machine Execution: G-code is loaded to the CNC controller and executed
Absolute vs. Incremental ming
G-code supports two distance modes:
- Absolute (G90): All coordinates are referenced from the zero (G54 work coordinate system). X10.0 always means “move to X=10.0 in the current WCS.” Safer and more widely used.
- Incremental (G91): Coordinates are relative to the current tool position. X10.0 means “move 10.0 units from where you are.” Used for patterns and repetitive features.
Common G-Code ming Mistakes
- Missing Tool Length Compensation (G43): Causes Z-depth errors and potential crashes
- Incorrect Work Offset (G54 vs G55): Causes parts to be machined in the wrong location
- Rapid Moves (G00) Too Close to Workpiece: Causes tool breakage or part scrap
- Wrong Units (G20 vs G21): 25.4x scaling error between inches and millimeters
- Missing Cutter Compensation (G41/G42): Results in undersized or oversized features
FAQ
When is What Is G-Code? Understanding CNC Programming Fundamentals the right choice?
What Is G-Code? Understanding CNC Programming Fundamentals is the right choice when the part requires machined accuracy, controlled surfaces, repeatable features, and a material that can be cut reliably.
What should be confirmed before ordering What Is G-Code? Understanding CNC Programming Fundamentals?
Confirmer la version du dessin, la qualité du matériau, les tolérances, la quantité, les dimensions critiques, l'état de surface et les exigences d'inspection avant de lancer la production.
What usually drives cost in What Is G-Code? Understanding CNC Programming Fundamentals?
Le coût est généralement déterminé par les matériaux, le temps de préparation, le temps machine, les difficultés liées aux tolérances, la fixation, l'accès aux outils, la finition, l'inspection et la quantité commandée.
How can quality risk be reduced in What Is G-Code? Understanding CNC Programming Fundamentals?
Le risque de qualité est réduit en marquant clairement les caractéristiques critiques, en évitant les tolérances trop étroites, en confirmant la fabricabilité à un stade précoce et en utilisant les données d'inspection pour les dimensions importantes.
